Open today · 7am to 7pm Daily Same-day service across Massachusetts
Service

Garage Door Opener Repair
in Massachusetts.

Opener hums but the door won't move, reverses before it closes, or ignores the remote? Most opener problems come down to an adjustment, a sensor, or one worn part. Repairs run $195-$450. When a repair isn't worth it on an old unit, a new opener is $574-$1,229 installed, and we tell you which makes sense before any work starts.

Pricing
$195-$450 · depends on the part
Time on site
Usually about an hour
Scheduling
Same-day when open, ask
Warranty
1 year labor
What's included

Every opener repair call gets the same checklist.

  • 01 Safety sensor alignment and wiring
  • 02 Travel limit and force adjustment
  • 03 Remote, keypad and car programming
  • 04 Wall button and wiring checks
  • 05 Worn gear, trolley or logic board replacement
  • 06 Written price before any work starts
Prices

What garage door opener repair costs

An opener that stops working is not always a dead opener. Three jobs in our records included work on an opener that stayed in place: Dunstable in September 2026, Littleton in September 2026 and Andover in August 2026. What was done on each is on the job cards below.

If the opener quits with the car inside, the checklist further down comes first. If that does not get the door open, it is an emergency call; the terms are in the price list below.

Opener repair
$195-$450
Depends on the part
Emergency call
$300 minimum
Emergency calls are $300 minimum, which covers the visit and the repair up to $300; a bigger repair costs the same as it would scheduled.

Ranges come from our 2026 price list, set from Jobber invoices and accepted quotes. Each range is for that job done on its own. You get the exact price in writing before any work starts.

From our job records

Recent garage door opener repair jobs

  1. September 2026Dunstable

    A new pair of extension springs with safety containment cables, pulleys and sheaves, the door rebalanced and safety-tested, plus lubrication, spring tension and opener adjustment.

  2. September 2026Littleton

    Service call to fix the opener safety sensors.

  3. August 2026Andover

    Opener adjusted so it stopped hitting the top section, and the tracks realigned.

Finished, invoiced jobs from our Jobber records. We leave out customers' names and street addresses.

Safety

Test the auto-reverse once a month

The 2x4 test

Federal rules require every opener manual to tell you to test the opener monthly. Lay a 2x4 flat on the floor in the middle of the doorway and close the door with the wall button. The door must reverse when it touches the board. Test again after any change to the force or travel settings.

If the door does not reverse, do not use the opener to close it until it is fixed. Force and travel-limit adjustment is part of opener repair.

Source: 16 CFR 1211.16, the safety instructions every opener manual must carry (eCFR)

Right now

If the opener quits

Nothing happens at all
Check that the opener is plugged in at the ceiling outlet, then the breaker, then any GFCI outlet in the garage.
The wall button works but a remote does not
It is the remote's battery, not the opener.
The opener hums or clicks and the door stays put
Check the manual lock on the inside of the door. If its bar is slid into the track, the opener cannot move the door.
The motor runs but the door does not move
If someone pulled the red release cord, the door is disconnected from the opener. Push the trolley on the rail toward the door until it clicks back onto the carriage.
The car is inside and the door is fully closed
Pull the red release cord down and toward the opener, then lift the door by hand. Only do this with the door fully closed. If it feels far too heavy to lift, a spring has broken: stop and call.

Sources: Eric's emergency checklist: Garage Door Won't Open?; 16 CFR 1211.16, the safety instructions every opener manual must carry (eCFR)

Call (978) 758-0690. Phone hours: 7am to 7pm Daily. Same-day service when the schedule allows. Outside these hours, leave a message for a call back first thing.

What customers say

Reviews that read like
a thank-you note.

5.0 ★★★★★
on 13 Google reviews

50 reviews across Google, Thumbtack, Angi, Facebook and Yelp. See every profile.

★ ★ ★ ★ ★
"I highly recommend Eric, we had him fix our garage door few months ago, recently we were having some issues with it. I called Eric on the weekend and he immediately answered the phone, and came within an hour to our place to fix it. I was extremely impressed about how responsive and thorough professional Eric is."
BS
Basharat Sheikh Google Review · Aug 2025
★ ★ ★ ★ ★
"Eric was able to help me out on a super cold Monday holiday recently. He was able to diagnose my issue and get my garage door working again. Price was fair and he was very good at providing some insight into things to keep an eye on moving forward. I'll definitely keep him on speed dial for whatever I run into next."
B
Bob North Attleborough, MA · Jan 2025
★ ★ ★ ★ ★
"Our technician Eric came on time gave a more fair price then we were previously quoted from another company and did the job quickly and thoroughly and now our door is working better then ever (even got rid of that annoying clicking noise we used to have)."
S
SebiiCeleb Google Review · Oct 2025
FAQs · Opener repair

Quick answers before you call.

How much does garage door opener repair cost?+
Opener repair runs $195-$450. The low end is an adjustment or reprogramming: aligning the safety sensors, resetting the travel limits and force, or pairing remotes, keypads and your car. The high end is a replacement part such as a drive gear, trolley or logic board. You get the written price before any work starts, and a scheduled visit has no trip fee.
Should I repair or replace my garage door opener?+
Repair it if the opener is under about 10 years old and the fault is a sensor, a setting or one worn part: that is $195-$450. Replace it if it is older, the motor itself has failed, or the repair would come close to the price of a new one, which is $574-$1,229 installed. We tell you which makes sense before you pay for anything.
Why does my garage door go down and then back up?+
Usually the safety sensors. The two small eyes near the bottom of the tracks must see each other; if one is knocked out of line, dirty, or in direct low sun, the opener reverses the door as a safety measure. If the sensors are fine, the close force or down limit is set wrong, or something on the track is making the door bind. Aligning sensors and resetting the limits is a short, low-cost visit.
My opener hums but the door doesn't move. What's wrong?+
Check the door before the opener. A broken spring makes the door far too heavy to lift, and the opener hums or strains. Do not keep pressing the button, and do not try to lift a door with a broken spring. If the springs are intact, a humming motor with no movement usually points to a stripped drive gear or a failed start capacitor, both of which are repairable on most LiftMaster and Chamberlain units.
Can you program my remotes, keypad and car to the opener?+
Yes. We pair remotes, wireless keypads and car built-in buttons (HomeLink) during any opener visit, and set up the myQ app on openers that support it. If your opener is too old to work with newer remotes, we explain the options before you buy anything.
Ready when you are

Let's get your door working again.

Whether your door is stuck or you need an estimate for a new install, call, text, or request service online. Call for urgent repairs and to confirm the next available appointment.

5.0 | Same-Day Service | Licensed & Insured
Text Us